STANAG is specified by the NATO (North Atlantic Treaty Organization) Military Agency for Standardization in “Characteristics of / / Bits per. 26 May In this video YouTube user Superphish shows decoding of the French Navy STANAG test signal. He used an rtl-sdr, Ham-it-up. 21 Apr Sigmira is a popular free Windows software program which supports decoding of radio modes such as PSK31, RTTY, CW, STANAG
|Published (Last):||24 March 2007|
|PDF File Size:||17.68 Mb|
|ePub File Size:||8.75 Mb|
|Price:||Free* [*Free Regsitration Required]|
User data is in this case first FEC encoded, interleaved, then mapped into PSK symbol and transmitted in 32 symbol data segment. The 16 symbol channel segment transmitted between every data segment has a known PSK pattern.
The 7 data-bits are LSB first. Using different M-PSK modulations and FEC Forward Error Correction coding rates, serial binary user information raw data accepted at the line side input can be transmitted at different user data rates.
User data rate bps. The 8 data-bits are LSB first. The EOM sequence is followed by flush bits, which are for FEC coder flushing 428 for the complete transmission of the remainder of the interleaver data block.
The mode decoder can process signal in both SSB settings: The center frequency of the decoder should be set to Hz when the receiver is correctly tuned to the sending station. This frame structure makes the synchronization of the stanxg in the mid of the transmission very easy.
Using the Frame Format field the decoder can be set to one of the signal configurations. After the symbol data-probe segment another frame beginning with the same symbol preamble follows immediately.
French Navy FUE, STANAG asynchronous ITA2 framing | diario SWL I Antonio
The modulation technique used in this mode consists of phase shift keying 8-PSK of a single tone sub-carrier of Hz. By using the stabag, any remaining frequency difference can be compensated for by fine-tuning of stansg receiver frequency or by adjusting the center frequency of the decoder.
The decoder stops displaying data after the EOM bit pattern is received. This should be set manually in the Frame Format menu. Its purpose is to keep the demodulator, mainly the equalizer, on track in spite of adverse propagation conditions during the HF transmission.
In addition to the EOM pattern, the display will stop if more than NULL characters are received or if the asynchronous data structure is violated more than 80 times. The modulation speed symbol rate is always Bd.
STANAG – Signal Identification Wiki
Each frame begins with a When the Confidence value is greater than 95 i. This can be set by toggling the Polarity field: The user data is transmitted using a continuous frame structure. This feature enables the user to analyse the demodulated symbol when the above coding scheme deviates from the standard. Small frequency deviations are automatically tracked and compensated during the decoding.
In most cases FEC and interleaver are used to combat the effects of fading, frequency shift, multipath effects and burst noise.